Best value for your Ironworking needs.
219 punch and 413 die
Angle Shear: 3" x 3" x 1/2", 4" x 4" x 3/8", mild steel
Angle Shear: 3" x 3" x 3/8", 4" x 4" x 1/4", mild steel
Flat Bar Shear: 3/8" x 14", 1/2" x 12", 3/4" x 4" mild steel
3/8" x 14", 1/2" x 12", 3/4" x 4" mild steel
Precisely notch plate or angle up to 3/8" thick mild steel
2-1/2" x 4" x 3/8" mild steel
14 sets of punches and dies
14 sets of 219 punches and 413 dies sizes from 1/4" through
1-1/16" in 1/16 increments.
Packed in a metal container.
8 sets of punches and dies
8 sets of 228 punches and 419 dies sizes 1-1/8" through 1-9/16" in 1/16" increments.
Used on 228/419 oversized attachment only.
Oversized attachment: up to 1-1/2" round or Oversized attachment (shown) up to 4" round
228 Punch 419 Die: Punches sizes up to 1-1/2" round through 5/16" thick mild steel - 241 Punch 28XX Die (shown) Punches sizes up to 3-1/2" round through 1/8" mild steel
Provides task lighting
Provides 100,000 hours of LED light. Attaches to any Ironworker surface.
Machine comes with 2 LED lights installed in shearing station
Reduce deformation in 1/4" to 1" mild steel rod
Shears 1/4 , 3/8 , 1/2 , 5/8 , 3/4 , 1" mild steel
Combined Flat Bar, Angle and Rod Shear for mild steel
Flat Bar Shear: 1/4" x 6" mild steel - Angle Shear: 2" x 2" x 1/4" mild steel - Rod Shear: 1/4", 3/8", 1/2", 5/8", 3/4" mild steel - Square rod 13/16"
Controlled, repeatable bends in 1/4" thick mild steel
8" or 10" Wide, 1/4" thick mild steel
Notch up to 2" Schedule 40 Pipe
Standard die sizes are 1/2", 3/4", 1", 1-1/4", 1-1/2", 2"
Schedule 40 Pipe
Load 3 different pipe notcher dies at once.
Load 3 different pipe notcher dies at once and quickly switch from one size to the next.
Optional Pipe Notcher Dies
Precise 92 degree Notch in 1/4" mild steel
3" x 3" x 1/4" mild steel
Cut Long Material into Repeatable Lengths
Adjustable proximity switch automates production when cutting repeatable lengths.